£8.50 exc. VAT
|1 - 9||£8.50 Per Item|
|10 - 49||£8.20 Per Item|
|50 - 99||£8.05 Per Item|
|100 - 249||£7.90 Per Item|
|250 - 500||£7.75 Per Item|
The YSL9092SPRWAS/1.7m is a non-Magnetic iButton® Probe/Reader with a 1.7m length of Cable held by a Sprung Washer
YSL9092SPRWAS/1.7m iButton® Probe
The YSL9092SPRWAS iButton® Probe provides the electrical contact necessary for the transfer of data to and from the DS19xx family of iButtons. The round probe shape provides a self-aligning interface that readily matches the circular rim of the iButton®’s MicroCan package. Metal contacts resist wear and are easy to keep clean. The centre contact of the standard reader has no moving parts, making this a more rugged interface compared to sprung centre contact. This type of probe is best suited for designs where the iButton® is brought into contact with the reader. The panel-mount probes are fastened behind the panel with 8.4mm plain spindle held in position with a Sprung Clip. The cable consists of 2 wires (White Data, Brown Ground) in a Black sheathed Outer of 1.7m length.
Option of customising with the addition of a Connector–please enquire for addition cost based on volume and Connector type.
The Reader is not suitable for External/Harsh environments.
- – Probe guides the entry of the iButton®
– iButton® slides over the surface to self-clean contacts
– Suitable for use with Magnetic Key where Magnet is in the Key
– Bright Chromium metal surface offers a visually better option than DS9092
– Panel-mount probe, pre-wired for easy installation with 1.7m Cable as standard
You may also like…
Magnetic iButton® Key – YSL90SPRMAGxxx£5.45
Magnetic iButton® Key where the Magnet is in the Key not in the Reader. The benefit here being, compared to the standard Dallas Magnetic Key (YSL90RMAGxxx), there is a wider selection of Probe/Readers available both with and without LED.Read more £5.45 Add to basket